How to Solve the Common trouble of screw conveyor?

How to Solve the Common trouble of screw conveyor?

If the screw conveyor blockage during the operation,how do you solve the problem?Here PK Machinery would like to introduce the common troubles and troubleshooting of screw conveyor as follows.Hope you have a better understanding.

screw conveyor

1.Screw conveyor blockage

Strict enforcement of operation rules, make sure that when the machine start and stop it is no-load and feeding continuous and even or increase the outlet. The reason doing this is that solve the problem of blockage or too late to discharge avoid screw conveyor blockage.

2.Screw conveyor motor burning out

If the incoming material is too large then it will result in the motor loading is too large, the motor will heating and burning out. In order to avoid motor heating result in motor burning out you should keep feeding uniformly and finish the conveying before the machine stop.

3.Screw conveyor gives out too much noise 

If the inner shaft or both axes head occurs bend will caused friction between screw blade and tube wall. The reducer and motor will be burn out if you do not deal with the problem of screw conveyor gives out too much noise immediately.

screw conveyor

If you start the screw conveyor occurs problem of excessive noise, you should stop the machine immediately. Then take out the inner shaft of the screw conveyor to check out that whether the spindle nose bend or shaft bend. After confirming the problem then you just need to adjust it.

If you have any interest,welcome to contact us via info@pkmachinery.com or www.pkmachinery.com